JVC GET0467-001A manual Remote controller RM-RK50

Remote controller — RM-RK50

Installing the lithium coin battery (CR2025)

CR2025

Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between.

Warning:

•Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.

•Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time; otherwise, it may explode.

•Store the battery in a place where children cannot reach to avoid risk of accident.

•To prevent the battery from over-heating, cracking, or starting a fire:

–Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

–Do not leave the battery with other metallic materials.

–Do not poke the battery with tweezers or similar tools.

–Wrap the battery with tape and insulate when throwing away or saving it.

Main elements and features

ENGLISH

1(standby/on/attenuator) button

•Turns the power on if pressed briefly or attenuates the sound when the power is on.

•Turns the power off if pressed and held. 2 5U (up) / D (down) ∞buttons

•Changes the FM/AM bands with 5U.

•Changes the preset stations with D ∞.

•Changes the folder of the MP3/WMA discs.

•While listening to an Apple iPod.

–Pauses or resumes playback with D ∞.

–Enters the main menu with 5U.

(Now 5U/D ∞/2R/F 3work as the menu selecting buttons.)*

3VOL – / VOL + buttons

•Adjusts the volume level. 4 SOUND button

•Selects the sound mode (iEQ: intelligent

equalizer).

5SOURCE button

• Selects the source.

*5U : Returns to the previous menu.

D ∞ : Confirms the selection.

Continued on the next page

5