JVC GET0467-001A manual More about this unit

To keep discs clean

A dirty disc may not play correctly.

If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

•Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Do not use the following discs:

Warped disc

Sticker Sticker residue

Stick-on label

Unusual shape

Single CD (8 cm disc)

More about this unit

Basic operations	ENGLISH
Turning on the power
• By pressing SRC on the unit, you can also turn on the
power. If the source is ready, playback also starts.

Turning off the power

•If you turn off the power while listening to a track, playback starts from where playback it has been stopped previously, next time you turn on the power.

General

•If you change the source while listening to a disc or an iPod, playback stops.

Next time you select “CD” or “IPOD” as the playback source, playback starts from where it has been stopped/paused previously.

•After ejecting a disc or disconnecting an iPod, “NO DISC” or “NO IPOD” appears and you cannot operate some of the buttons. Insert another disc, reconnect an iPod, or press SRC to select another playback source.

Tuner operations

Storing stations in memory

•During SSM search...

–All previously stored stations are erased and stations are stored newly.

–Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

–When SSM is over, the station stored in No. 1 will be automatically tuned in.

•When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

Continued on the next page

17