JVC GET0467-001A manual Frequency band

Indications	Item			Setting, [reference page]
	(		: Initial)
SCROLL*2	• ONCE			:	Scrolls the track information once.
Scroll	• AUTO			:	Repeats scrolling (at 5-second intervals).
	• OFF			:	Cancels.
				•	Pressing DISP for more than one second can scroll the display
					regardless of the setting.
L/O MODE	• REAR			:	Select if the REAR LINE OUT terminals are used for connecting the
Line output mode					speakers (through an external amplifier).
	• WOOFER			:	Select if the REAR LINE OUT terminals are used for connecting a
					subwoofer (through an external amplifier).
WOOFER*3	• LOW			:	Frequencies lower than 90 Hz are sent to the subwoofer.
Subwoofer cutoff	•	MID		:	Frequencies lower than 135 Hz are sent to the subwoofer.
frequency	• HIGH			:	Frequencies lower than 180 Hz are sent to the subwoofer.
AUX ADJ	A.ADJ 00			:	Adjust the auxiliary input level to avoid the sudden increase of the
Auxiliary input level	— A.ADJ 05				output level when changing the source from external component
adjustment					connected to the AUX input jack on the control panel.
TAG DISP	• TAG ON			: Shows the Tag information while playing MP3/WMA tracks, [10].
Tag display	• TAG OFF			:	Cancels.
AMP GAIN	• LOW PWR			: VOL 00 – VOL 30. (Select this if the maximum power of the speaker is
Amplifier gain					less than 50 W to prevent damaging the speaker.)
control	•	HIGH PWR		: VOL 00 – VOL 50.
IF BAND	• AUTO			:	Increases the tuner selectivity to reduce interference noises between
Intermediate					close stations. (Stereo effect may be lost.)
frequency band	• WIDE			:	Subject to interference noises from adjacent stations, but sound
					quality will not be degraded and the stereo effect will remain.

*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 Displayed only when “L/O MODE” is set to “WOOFER.”

ENGLISH

15