EN 49

SYSTEM

DISPLAY

DEMO

OFF

MODE

ON

 

SIDE LED

ON

(GR-DVL1020/

 

 

DVL820 only)

OFF

 

 

CAM

 

CANCEL

RESET

 

EXECUTE

 

 

ON

LCD

SCREEN

 

 

 

 

 

 

LCD/TV

DATE/

 

OFF

TIME

 

AUTO

 

 

 

 

 

 

 

ON

TIME

 

OFF

CODE

 

ON

 

 

CLOCK ADJ.

Automatic demonstration will not take place.

Demonstrates certain functions such as Programme AE with special effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases:

When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes

after the Power Switch is set to “ AUTO ” or “ MANUAL ” .

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

If a tape is in the camcorder, the demonstration cannot be turned on.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.

The Side LED indicator (p. 80, 81) lights on the camcorder when the Power

Switch is set to “

AUTO

” or “

MANUAL

”.

 

 

 

Does not reset all settings to the factory-preset.

Resets all settings to the factory-preset.

Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.

Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.

The date/time does not appear.

Displays the date/time for approx. 5 seconds in the following cases:

• When the Power Switch is set from “OFF” to “ AUTO ” or “ MANUAL ”.

When tape playback starts. The camcorder displays the date/time when scenes are recorded.

When the date is changed during tape playback.

The date/time is always displayed.

Time code is not displayed.

Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording.

Allows you to set the current date and time (pg. 11).

(GR-DVL1020/DVL820/DVL520 only)

DSC

QUALITY

 

 

 

Refer to “Picture Quality/Image Size Setting” (pg. 14).

IMAGE SIZE

 

 

 

 

REC

 

 

 

 

When Snapshot recording is performed with the VIDEO/MEMORY Switch set

 

 

 

 

SELECT

 

 

 

 

to “VIDEO”, still images are recorded only onto the tape.

 

 

 

 

/

When Snapshot recording is performed with the VIDEO/MEMORY Switch set

 

 

 

 

to “VIDEO”, still images are recorded not only onto the tape but also on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in

 

 

 

 

 

the CAMERA Menu is also applicable to memory card recording.

 

 

 

 

 

 

: Factory-preset

NOTES:

SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ MANUAL ” are also applied when the Power Switch is set to “PLAY” (pg. 50). “CLOCK ADJ.” only appears when the Power Switch is set to

MANUAL ”.

Settings made in the “

 

DISPLAY” Menu remain effective even when the Power Switch is set to “

AUTO

”. However,

the menu settings can be changed only when the Power Switch is set to “

MANUAL

”.

 

 

 

 

 

 

 

 

The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided) (pg. 23, 52, 59).

Page 50
Image 50
JVC GR-DVL820 specifications GR-DVL1020/DVL820/DVL520 only, Refer to Picture Quality/Image Size Setting pg