|
| EN 73 | |
|
|
| |
SYMPTOM | POSSIBLE CAUSES | CORRECTIVE ACTION | |
W The LCD monitor, the |
| • Wipe them gently with soft cloth. | |
viewfinder and the lens | Wiping strongly can cause damage | ||
have become dirty (ex. | (☞ pg. 74). | ||
| |||
fingerprints). |
|
| |
|
|
| |
E An unusual mark appears. |
| • Check the section of the manual | |
| that explains LCD monitor/ | ||
| viewfinder indications | ||
|
| ||
|
| (☞ pg. 82 – 86). | |
|
|
| |
R An error indication | • A malfunction of some kind has | • Remove the power supply (battery | |
(E01, E02 or E06) appears. | occurred. In this case the | pack, etc.) and wait a few minutes | |
| camcorder’s functions become | for the indication to clear. When it | |
| unusable. | does, you can resume using the | |
|
| camcorder. If the indication | |
|
| remains even though you repeat | |
|
| the above two or three times, | |
|
| please consult your nearest JVC | |
|
| dealer. Do not eject the cassette. | |
|
| This will cause damage to the tape. | |
|
|
| |
T An error indication | • A malfunction of some kind has | • Eject the cassette once and re- | |
(E03 or E04) appears. | occurred. In this case the | insert it, then check if the indication | |
| camcorder’s functions become | clears. When it does, you can | |
| unusable. | resume using the camcorder. If the | |
|
| indication remains even though | |
|
| you repeat the above two or three | |
|
| times, please consult your nearest | |
|
| JVC dealer. | |
|
|
| |
Y The charger indicator on | • The temperature of the battery is | • To protect the battery, it is | |
the camcorder does not | extremely high/low. | recommended to charge it in | |
light. | • Charging is difficult in places | places with a temperature of 10°C | |
| subject to extremely high/low | to 35°C (☞ pg. 75). | |
| temperatures. |
| |
|
|
| |
U When the image is printed | • This is not a malfunction. | • By recording with “DIS” activated | |
from the printer, a black bar |
| (☞ pg. 47) this can be avoided. | |
appears at the bottom of |
|
| |
the screen. |
|
| |
|
|
| |
I When the camcorder is | • The DV cable was plugged/ | • Turn the camcorder’s power off | |
connected via the DV | unplugged with power turned on. | and on again, then operate it. | |
connector, the camcorder |
|
| |
does not operate. |
|
| |
|
|
| |
O The memory card cannot |
| • Push in the memory card a few | |
be removed from the | more times (☞ pg. 14). | ||
camcorder. |
|
| |
|
|
|
