JVC GR-DVL820, GR-DVL1020 38 EN, To Deactivate Night-Scope, To Deactivate The Selected Mode

38 EN	FOR RECORDING
NOTES:	Night-Scope
● During Night-Scope, the following functions or settings	Makes dark subjects or areas even brighter than they
cannot be activated and its indicator blinks or goes out:
• Some modes of “Programme AE With Special Effects”	would be under good natural lighting. Although the
(☞ pg. 38, 39).	recorded image is not grainy, it may look as if it is
• “GAIN UP” in the CAMERA Menu (☞ pg. 47).	strobing due to the slow shutter speed.
• “DIS” in the MANUAL Menu (☞ pg.47).	1 Set the Power Switch to “	MANUAL	” while pressing
• “Video light” when LIGHT OFF/AUTO/ON is set to
“AUTO” (☞ pg. 19).	down the Lock Button located on the switch.
● During Night-Scope, it may be difficult to bring the	2 Press NIGHT so that the Night-Scope indicator
camcorder into focus. To prevent this, use of manual
focus and/or a tripod is recommended.	“ ”appears.

• The shutter speed is automatically adjusted to provide up to 30 times sensitivity.

• “A” appears beside “ ” while the shutter speed is being automatically adjusted.

To Deactivate Night-Scope . . .

MENU/BRIGHT Wheel	..... press NIGHT again so that the Night-Scope
	indicator disappears.

Lock Button

Power Switch

NIGHT Button

Display

▲

SNOW

SPOT L I GHT

TW I L I GHT

SEP I A

MONOTONE

CLASS I C F I LM

STROBE

SLOW 4X

SLOW 1 0X

▼

GR-DVL1020/DVL820/DVL520 only

Programme AE With Special Effects

1 Set the Power Switch to “ MANUAL ” while pressing

down the Lock Button located on the switch.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ PROGRAMME AE”, then press it.

4 Rotate the MENU/BRIGHT wheel to select the desired mode (☞ pg. 39), then press it. Selection is complete. Press the MENU/BRIGHT wheel in again. The Menu Screen closes.

•The PROGRAMME AE Menu disappears and the selected mode is activated. The selected mode indicator appears.

To Deactivate The Selected Mode . . .

..... select “OFF” in step 4.

NOTES:

●Programme AE with special effects can be changed during recording or during Record-Standby.

●Some modes of Programme AE special effects cannot be used during Night-Scope.

IMPORTANT

Some modes of Programme AE with special effects cannot be used with certain Fade/Wipe Effects (☞ pg. 40, 41). If an unusable mode is selected, its indicator blinks or goes out.