JVC GR-DVL38, GR-DVL28, GR-DVL33, GR-DVL48 specifications EN43, Make Connections

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the RM-V711U’s PAUSE IN connector.

2 Insert a recorded tape into the camcorder and set the

Power Switch to “ ”.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

SELECT SCENES

Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control.

The Random Assemble Editing Menu appears.

To connect to:

A JVC VCR equipped with a remote pause connector . . .

Connector cover**

Connector cover**

To JLIP***					To
Core filter					S-Video
					Output
	Yellow to		Red to
	Video		Audio
	Output*		Output R
	White to	A/V cable (provided)
	Audio Output L	[RCA plug to RCA plug]
Editing cable				S-Video
				cable
(provided)
				(provided)
	To AUDIO,
	VIDEO*
	and	-IN

connectors
To Remote
PAUSE or R.A.EDIT	VCR

To PAUSE IN
	TV
T	W
DISPLAY
FADE/WIPE	PLAY
RM-V711U	R.A.EDIT
(provided)	ON/OFF

*Connect when the S-Video cable is not used.

**When connecting cables, open this cover.

***Use the plug which has three yellow rings around the pin.

EN43

MAKE CONNECTIONS

Also refer to pg. 32 and 33.

1

4

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Programme 1.

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

●When editing on a VCR equipped with DV input connector, the DV cable can be connected instead of the S-Video cable and Audio/Video cable.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the Playback Menu (☞ pg. 30).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Playback Menu (☞ pg. 30).

•Playback Sound Mode Display

.... set the Power Switch to “ ”. Press MENU/BRIGHT and set “ON SCREEN” in the Date/Time Menu

(☞ pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “ ”.

CONTINUED ON NEXT PAGE