JVC GR-DVL48 46 EN, For More Accurate Editing, Diagnosing VCR/CAMCORDER Timing, Recording deck

46EN

USINGTHEREMOTECONTROLUNIT(cont.)

Programme 1

	I N	OUT	MODE	Random Assemble
1	– – – – : – –	~
2		~		Editing Menu
3		~
4		~
5		~
6		~
7		~
8	TIME CODE	~
		– – : – –	4
	TOTAL	0 0 : 0 0

For More Accurate Editing

Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.

VCR

(Recording deck)

TV

DIAGNOSING VCR/CAMCORDER TIMING

1 Play back the tape in the camcorder, then point the remote control at the camcorder’s remote sensor and press R.A.EDIT ON/OFF.

The Random Assemble Editing Menu appears.

2 Perform Random Assemble Editing on Programme 1 only. In order to check VCR and camcorder timing,

Remote sensor

select the beginning of a scene transition as your Edit- In point.

3 Play back the dubbed scene.

•If any images from the scene prior to the transition you chose for your Edit-In point were recorded, that means your VCR moves too quickly from Record-Pause to Record mode.

•If the scene you tried to dub starts in progress, the VCR is slow to start recording.

RM-V711U

T W (provided)

R.A.EDIT ON/OFF