JVC GR-DVM75 specifications Video Playback, Normal Playback, EN21, To Control The Speaker Volume

VIDEO PLAYBACK

Play/Pause Button (4/6)

Rewind Button (2)

Fast-Forward Button (3)

Stop Button (5)

VIDEO/DSC Switch (GR-DVM75 only)

Power Switch

Lock Button

	F
	F
Y	O
A
L
P

Power Zoom	Speaker
Lever (Speaker
Volume Control)
(VOL.)

EN21

Normal Playback

1Load a tape (
pg. 12).

2Set the VIDEO/DSC Switch to “VIDEO” (GR-

DVM75 only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2 to rewind, or 3 to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (Speaker Volume

Control) (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn

on again, set the Power Switch to “OFF”, then to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (
pg. 22, 23).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback: Allows frame-by-frame search.

1)Engage Still Playback.

2)Rotate MENU Wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

To resume normal playback, press 4/6.

●You can also use the provided remote control for Frame-By-Frame Playback (
pg. 64).

Playback Zoom and Playback Special Effects

Available only with the remote control (provided) (
pg. 64, 65).