![](/images/new-backgrounds/1140856/140856117x1.webp)
Rewind Button (2)
VIDEO/DSC Switch
Power Switch
Lock Button
| F |
| F |
Y | O |
| |
A |
|
L | |
P |
SNAPSHOT Button
| Display |
TO COPY TO TAPE | |
PUSH | “SNAPSHOT ” |
REC |
EN59
Dubbing Still Images Stored In A Memory Card To A Tape
Still images can be dubbed from a memory card to a tape.
1
2 To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point.
Set the VIDEO/DSC Switch to “ | ”, then set the | |
3 Power Switch to “ | ” while pressing down the |
Lock Button located on the switch.
4 To select a still image to be dubbed, perform Index Playback ( pg. 30), Auto Playback ( pg. 28) or press 2or 3to select the image you wish.
5 To engage
6 While the message is being displayed, press SNAPSHOT again. The selected still image is recorded on the tape for approx. 5 seconds.
•![](/images/new-backgrounds/1140856/140856117xi7.webp)
![](/images/new-backgrounds/1140856/140856117xi8.webp)
indicator disappears when dubbing is complete.
NOTE:
If SNAPSHOT is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.