JVC GR-DVM75 specifications EN35, To Print by Selecting Still Images and NO. of Prints

Power Switch

Lock Button

	F
	F
Y	O
A
L
P

MENU Wheel

				Number of prints
		Display			DPOF Index
E X I T		D P O F		VGA
100-DVC00021					Screen
19	00	20	00	21
22	00	23	00	24	00
		DPOF			Confirmation
SELECT			–	CANCEL	Screen
				EXECUTE

EN35

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1Perform steps 1 through 4 on pg. 34.

2Rotate the MENU Wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Index Screen appears.

3Rotate the MENU Wheel to move the green frame to the image you wish to print and press it.

4Select the number of prints by rotating the MENU Wheel towards “+” to increase the number, or towards “–” to decrease the number and press it. Repeat steps 3 and 4 for the desired number of prints.

•The number of prints can be set up to 15.

•To correct the number of prints, select the image again and change the number.

5Rotate the MENU Wheel upward to select “EXIT” and press it. Selection is complete. The Confirmation Screen appears.

6Rotate the MENU Wheel to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate the MENU Wheel to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

.... select “RESET” in step 5 on pg. 34. The number of

prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory to be corrupted.

NOTES:

●If you load a memory card already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a memory card (
pg. 60).