JVC Dubbing To Or From a VCR, For GR-DVM75 Owners, EN57, To use this camcorder as a player

Engage the VCR’s AUX and Record-Pause modes.

Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23.

DUBBING

To S-VIDEO
of jack box
	To AV IN/OUT***
	or AV OUT***
	Connector
	cover**
S-Video	Audio/Video cable
	[mini-plug to RCA
cable	plug] (provided)
(optional)
	To AUDIO,
	VIDEO* IN or
	OUT****
To S-VIDEO IN
or OUT****
	TV
	VCR

*Connect when an S-Video cable is not used. ** When connecting the cables, open this cover.

*** GR-DVM75: AV IN/OUT GR-DVM55: AV OUT

**** GR-DVM75 only

For GR-DVM75 Owners:

To Use This Camcorder As A

Recorder . . .

1.Set the camcorder’s VIDEO/DSC Switch to “VIDEO”, then set the camcorder’s Power

Switch to “ ” while pressing down the Lock Button located on the switch.

2.Set “S/AV INPUT” to “ON” and set “REC MODE” to “SP” or “LP” (
pg. 42).

3.Connect the cables as shown in the illustration and load a cassette to record on.

4.Press the Recording Start/Stop button to engage the Record-Pause mode. “ AV. IN ” appears on the screen.

5.Press the Recording Start/Stop button to

start recording. rotates.

6.Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

EN57

Dubbing To Or From A VCR

[To use this camcorder as a player]

1

2 Set the VIDEO/DSC Switch to “VIDEO” (GR- DVM75 only), then set the camcorder’s Power

Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

5 Press 4/6on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack (
pg. 8).

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 42, 43).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 42, 43).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (
pg. 42, 43). Or, press DISPLAY on the remote control.

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable.

Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

●You can use Playback Zoom (
pg. 64) or Playback Special Effects (
pg. 65) in step 5.