![](/images/new-backgrounds/1140856/140856147x1.webp)
74 EN | SYSTEM CONNECTIONS | ||
[A] Using USB or PC connection cable |
|
| |
|
| ||
| PC connection cable | To | |
| |||
To PC | (provided) | ||
| |||
| USB cable | To USB | |
| (provided) | connector | |
To USB |
| PC | |
|
| ||
OR |
| ||
[B] Using DV cable |
| ||
|
| ||
| DV cable | To DV | |
To DV IN/OUT | connector | ||
(optional) | |||
| Core filter | Core filter | |
Open the connector cover. |
| PC with DV connector | |
|
|
Connection To A Personal Computer
[A] Using USB or PC connection cable
This camcorder can transfer still images to a PC by using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.
1 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.
2 For
“ ”.
•Only the still images stored in the memory card can be transferred to a PC.
3 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.
•Refer to the instruction manual of the software on how to transfer a still image to the PC.
NOTES:
●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).
●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with a DV
●When using a DV cable, be sure to use the optional JVC
●The system may not work properly depending on the PC or capture board you are using.
For GR-DVM75 Owners:
“USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.