![](/images/new-backgrounds/1140856/140856119x1.webp)
60 EN
Play/Pause Button ![](/images/new-backgrounds/1140856/140856119xi2.webp)
![](/images/new-backgrounds/1140856/140856119xi3.webp)
(4/6)![](/images/new-backgrounds/1140856/140856119xi5.webp)
![](/images/new-backgrounds/1140856/140856119xi6.webp)
![](/images/new-backgrounds/1140856/140856119xi7.webp)
VIDEO/DSC Switch
Power Switch | |
Lock Button | |
| F |
| F |
Y | O |
| |
A |
|
L | |
P |
SNAPSHOT
Button
MENU Wheel
Display
VIDEO Menu
COPY – OF F
ON
SP | 6 |
DUBBING (cont.)
Dubbing Still Images Recorded On A Tape To A Memory Card
Still images can be dubbed from a tape to a memory card.
1
2 Select the Snapshot mode in the Menu Screen ( pg. 26) to use for dubbing the image to the memory card.
3 Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “ ” while pressing down the Lock Button located on the switch.
4 Press the MENU Wheel in. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.
5 Rotate the MENU Wheel to select “ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.
6 Rotate the MENU Wheel to select “RETURN” and press it twice. The normal playback screen resumes.
7 To select a still image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.
8 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.
•“ ” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using the WIDE mode ( pg. 40) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you wish to dub, perform up to step 8 using the remote control (provided) ( pg. 65).
●Images are dubbed in VGA file size.