34 EN
Master Page: Left
GR-DVP7-5EG_26-36.fm Page 34
New still pictures you are going to take can be
separated from previously shot pictures by resetting
the file name to DVC00001; these new pictures will
be stored in a new folder.
1Load a memory card. (墌pg.17)
2Set the VIDEO/MEMORY Switch to “MEMORY”.
3Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4Open the LCD monitor fully, or pull out the
viewfinder fully.
●The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5If the video clip playback (E-MAILCLIP,
(墌pg.29)) or the digital sound playback
(SOUND, (墌pg.29)) screen appears, press SET/
SELECT. The MEMORY SELECT screen appears.
6Press + or – to select “IMAGE”, and press SET/
SELECT. The image playback screen (IMAGE)
appears.
7Press MENU. The Menu Screen appears.
8Press + or – to select “NO. RESET”, and press
SET/SELECT. The NO. RESET screen appears.
9Press + or – to select “EXECUTE”, and press SET/
SELECT. The new folder (such as “101JVCGR”)
will be made and the file made of the next shot
starts from DVC00001.
Folder and File names
Each time shooting takes place, a file name is made
using a number which is larger by one than the
largest number of the file names which are in use.
Even if you delete an image file with a number in the
middle of range, the number will not be used for a
new shot; a gap will remain in the numerical
sequence. If the file name reaches DVC09999, a
new folder (such as “101JVCGR”) will be made and
the file name will start again from DVC00001.
This camcorder is compatible with the DPOF
(Digital Print Order Format) standard in order to
support future systems such as automatic printing.
You can select one of the 2 print information settings
for images stored in the memory card:“To Print All
Still Images (One Print For Each)”or “To Print By
Selecting Still Images And Number Of Prints”.
NOTES:
●If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
●To print images recorded on a tape, first dub them
to a memory card. (墌pg.65)
To Print All Still Images (One Print For Each)
1Load a memory card. (墌pg. 17)
2Set the VIDEO/MEMORY Switch to “MEMORY”.
3Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4Open the LCD monitor fully, or pull out the
viewfinder fully.
●The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5If the video clip playback (E-MAILCLIP,
(墌pg.29)) or the digital sound playback
(SOUND, (墌pg.29)) screen appears, press SET/
SELECT. The MEMORY SELECT screen appears.
6Press + or – to select “IMAGE”, and press SET/
SELECT. The image playback screen (IMAGE)
appears.
7Press MENU. The Menu Screen appears.
8Press + or – to select
“DPOF”, and press
SET/SELECT. The Sub
Menu appears.
9Press + or – to select
“ALL1”, and press
SET/SELECT. The
DPOF screen appears.
Making A New Folder Setting Print Information (DPOF Setting)DPOF
M
E
NU
RENT
ALL 1
RESET
RETURN
CUR
D.S.C. PLAYBACK (cont.)
GR-DVP7-5EG_02-08.book Page 34 Thursday, February 28, 2002 11:39 AM