EN 85

 

Other problems

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

 

25.

The CHARGE indicator on the

25.

•The temperature of the

25.

•To protect the battery, it is

 

 

AC Power Adapter/Charger

 

battery is extremely high/low.

 

recommended to charge it in

 

 

does not light.

 

•Charging is difficult in places

 

places with a temperature of

 

 

 

 

subject to extremely high/

 

10°C to 35°C. ( pg. 88)

 

 

 

 

low temperatures.

 

 

 

 

 

 

 

 

 

 

26.

“SET DATE/TIME!” appears.

26.

•The built-in clock’s

26.

•Connect the camcorder to an

 

 

 

 

rechargeable lithium battery

 

AC outlet using the AC Power

 

 

 

 

is discharged.

 

Adapter/Charger for over 24

 

 

 

 

•The previously set date/time

 

hours to charge the clock’s

 

 

 

 

is erased.

 

lithium battery. ( pg. 15)

 

 

 

 

 

 

 

 

27.

There is no picture.

27.

•The camcorder is not getting

27.

•Turn the camcorder’s power

 

 

 

 

power, or some other

 

off and on again. ( pg. 14)

 

 

 

 

malfunction exists.

 

 

 

 

 

 

 

 

 

 

28.

Some functions are not

28.

•The Power Switch is set to

28.

•Set the Power Switch to “M”.

 

 

available using the MENU

 

“A”.

 

( pg. 14)

 

 

Button.

 

 

 

 

 

 

 

 

 

 

 

 

29.

Files stored in the memory

29.

•Files stored in the memory

29.

•Remove protection from the

 

 

card cannot be deleted.

 

card are protected.

 

files stored in the memory

 

 

 

 

 

 

card and delete them.

 

 

 

 

 

 

( pg. 31 – 33)

 

 

 

 

 

 

 

 

30.

When the image is printed

30.

•This is not a malfunction.

30.

•By recording with “DIS”

 

 

from the printer, a black bar

 

 

 

activated ( pg. 45) this can

 

 

appears at the bottom of the

 

 

 

be avoided.

 

 

screen.

 

 

 

 

 

 

 

 

 

 

 

 

31.

When the camcorder is

31.

•The DV cable was plugged/

31.

•Turn the camcorder’s power

 

 

connected via the DV

 

unplugged with power

 

off and on again, then

 

 

connector, the camcorder does

 

turned on.

 

operate it.

 

 

not operate.

 

 

 

 

 

 

 

 

 

 

 

 

32.

The rear of the LCD monitor is

32.

•The light used to illuminate

32.

•Close the LCD monitor to

 

 

hot.

 

the LCD monitor causes it to

 

turn it off or set the Power

 

 

 

 

become hot.

 

Switch to “OFF”, and let the

 

 

 

 

 

 

unit cool down.

 

 

 

 

 

 

 

 

33.

Images on the LCD monitor

33.

•In places subject to high

33.

•Adjust the brightness and

 

 

appear dark or whitish.

 

temperature, images become

 

angle of the LCD monitor.

 

 

 

 

dark due to the

 

( pg. 13)

 

 

 

 

characteristics of the LCD

 

 

 

 

 

 

monitor. When this happens,

 

 

 

 

 

 

the displayed colours differ

 

 

 

 

 

 

from those that are actually

 

 

 

 

 

 

recorded. This is not a defect

 

 

 

 

 

 

of the camcorder.

 

 

 

 

 

 

•When the LCD monitor’s

 

 

 

 

 

 

fluorescent light reaches the

 

 

 

 

 

 

end of its service life, images

 

 

 

 

 

 

on the LCD monitor become

 

 

 

 

 

 

dark. Consult your nearest

 

 

 

 

 

 

JVC dealer.

 

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE

Page 85
Image 85
JVC GR-DVP7 instruction manual Other problems