EN 79
Master Page: Right
GR-DVP7-5EG_37-79.fm Page 79
This camcorder can be used as a WebCam via USB
connection.
* When connecting the cable, open the cover.
1Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2Connect the camcorder to your PC using the USB
cable.
3Set the VIDEO/MEMORY Switch to “MEMORY”.
4Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5Turn on the PC.
“Web CAMERA” appears on the screen.
If the PC is not
powered on, the
camcorder does not
enter the Web
Camera mode.
6When finished, turn
off the PC first, then
the camcorder.
Disconnect the USB cable from the camcorder
and PC.
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (pg.11)
Use the provided software PIXELA ImageMixer to
capture video in real time.
You can also use the camcorder for web
conference by using Microsoft Windows®
NetMeeting® and signing up for MSN Hotmail.
In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, the
Recording Start/Stop Button.
Using The Camcorder As A WebCam
VIDEO/MEMORY
Switch
To USB
To USB
connector
USB cable
(provided)
USB-equipped PC
Connector Cover*
Refer to the instruction manuals of the PC and
provided Software.
b CAMERAeW bCAMERAeW
P
C
GR-DVP7-5EG_02-08.book Page 79 Thursday, February 28, 2002 11:39 AM