JVC GR-DVP7 78 EN, Connection To a Personal Computer, Using USB cable, Using DV cable

78 EN SYSTEM CONNECTIONS

Connection To A Personal Computer

[A] Using USB cable

Connector

Cover**

To USB connector

USB cable (provided)

PC

To USB

OR

[B] Using DV cable

Connector	To DV IN/OUT*	DV cable	To DV
	or DV OUT*	(optional)	connector
Cover**
	Core filter		Core filter

PC with DV

connector

*DV IN/OUT: GR-DVP7

DV OUT: GR-DVP5

**When connecting the cable, open the cover.

[A] Using USB cable	● Never connect the USB cable and the DV cable
	simultaneously to the camcorder. Connect only
This camcorder can transfer still images to a PC by
	the cable you wish to use to the camcorder.
using the provided software.	● When using a DV cable, be sure to use the
[B] Using DV cable	optional JVC VC-VDV206U or VC-VDV204U DV
	cable depending on the type of DV connector (4
It is also possible to transfer still images to a PC with	or 6 pins) on the PC, or use the DV cable
	provided with the capture board.
a DV connector by using software equipped with the
	● If the PC connected to the camcorder via the USB
PC or commercially available software.
1 Connect the camcorder to your PC using the	cable is not powered, the camcorder does not
	enter the USB mode.
appropriate cable as shown in the illustration.
	● The date/time information cannot be captured into
2 If you are using the USB connection, set the
	the PC.
VIDEO/MEMORY switch to “MEMORY”.	● Refer to the instruction manuals of the PC and
3 Turn the camcorder’s Power Switch to “P”	Software.
while pressing down the Lock Button located on	● The still images can also be transferred to a PC
	with a DV connector-equipped capture board.
the switch and turn on the PC.
	● The system may not work properly depending on
● Refer to the instruction manual of the software
	the PC or capture board you are using.
on how to transfer a still image to the PC.
NOTES:	“USB MODE” and/or “ACCESSING FILES”
● Refer to “SOFTWARE INSTALLATION AND USB	appears on the LCD monitor while the PC is
OR PC CONNECTION GUIDE” for the installation	accessing data in the camcorder or the camcorder
of the bundled software and drivers.	is transferring a file to the PC.
● It is recommended to use the AC Power Adapter/	NEVER disconnect the USB cable while
Charger as the power supply instead of the battery	“ACCESSING FILES” is displayed on the LCD
pack. ( pg. 11)	monitor since this can result in product damage.