EN 59
Master Page: Right
GR-DVP7-5EG_37-79.fm Page 59
To add thumbnail images during tape playback
1Perform s teps 1 to 4 of “To find scenes on tape
using thumbnail images (NAVIGATION Search)”.
2Set “ COPY” to “NAVIGATION”.
(墌pg.38)
3Press 4/9 to start tape playback.
4Press SNAPSHOT at the desired point.
●The “ ” indicator appears and the image of
the point where SNAPSHOT is pressed is
stored on the memory card as a thumbnail
image.
To delete thumbnail images
1Load a memory card. (墌pg.17)
2Set the VIDEO/MEMORY switch to “VIDEO”.
3Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4Press MENU. The Menu Screen appears.
5Press + or – to select “tVIDEO”, and press
SET/SELECT. The VIDEO Menu appears.
6Press + or – to select
“NAVI.DEL.”, and
press SET/SELECT. The
Sub Menu appears.
7By pressing + or –...
Select “IMAGE SEL.” to
delete the currently
displayed thumbnail image.
Select “TAPE SEL.” to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select “ALL” to delete all thumbnail images
stored on the memory card at once.
8Press SET/SELECT. The
NAVIGATION screen
appears.
9Press + or – to select
“EXECUTE”, and press
SET/SELECT.
●Turn the SHUTTLE
SEARCH Ring to the
left (3) to display the previous page. Turn
the SHUTTLE SEARCH Ring to the right (5)
to display the next page.
●To cancel deletion, select “RETURN”.
●Thumbnail images cannot be deleted during
tape playback.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT
●Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognize Tape
and Memory Card IDs to perform NAVIGATION
function properly.
●Check if an appropriate tape and memory card are
loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE
NAVIGATION”, “THIS MEMORY CARD IS NOT
COMPATIBLE”.
●If you change the memory card while shooting on
one tape, two memory cards will share the tape’s
thumbnail images. We recommend that you use
one memory card for one tape.
●NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
●Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
●If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
DE..NAVI L
COPY
STEREO–
SOUND
1
SP
OFF
–
–
–
–
NRETUR
O.O
IG NANAV TIO
ETEDEL CURRENT?
EXECUTE
RETURN
1 .625 :50.0 02
GR-DVP7-5EG_37-79.fm Page 59 Thursday, February 28, 2002 5:16 PM