58 EN
Master Page: Left
GR-DVP7-5EG_37-79.fm Page 58
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.

To make thumbnail images during tape

recording

1Load a cassette. (墌pg.16)
2Load a memory card. (墌pg.17)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5Set “NAVIGATION” to the desired navigation
storing time. (墌pg.38, 47)
●The “ ” appears blinking on the screen.
Wait until it stops blinking. If it does not stop
blinking after a while, check if a memory card
is loaded.
6Press the Recording
Start/Stop Button to
start tape recording.
The image of the point
where recording is
started is captured.
●If the Recording
Start/Stop button is
pressed before
“” stops
blinking, the image
of the point where the loaded memory card is
recognised is captured.
●If the recording time is over the navigation time
set in step5, “ ” appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
7Press the Recording Start/Stop Buttonto stop tape
recording.
NOTES:
●The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT”is set to “ / ”
in DSC Menu, the number shows how many
640x 480 pixel images can be stored.
●If “5S” is set to “5S” or “Anim.” in MANUAL
menu, the NAVIGATION function will not work
properly.

To find scenes on tape using thumbnail images

(NAVIGATION Search)

1Load a cassette. (墌pg.16)
2Load a memory card. (墌pg. 17)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
5Press NAVI during video playback or stop mode.
●The loaded cassette’s
NAVIGATION
thumbnail image
screen appears.
●Turn the SHUTTLE
SEARCH Ring to the
left (3) to display
the previous page.
Turn the SHUTTLE SEARCH Ring to the right
(5) to display the next page.
6Press + or – to select the desired image, and press
SET/SELECT.
●The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring
to the left (3) or to the right (5).
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialise it.
NAVIGATION Function
Power Switc h
MENU Button
SNAPSHOT Button
VIDEO/MEMORY Switch
Lock Button
NAVI Button
PL
01
min
min
0
PAUSE
PAUSE
PL
01
min
0
PAUSE
Displayed while the
captured image is being
stored in the memory
card.
TC : 13: 23 : 1 5
35 2.4DATE: 2 :’30:229
ONITNAVI GA
1 2 3
4 5 006
FEATURES FOR RECORDING (cont.)
GR-DVP7-5EG_02-08.book Page 58 Thursday, February 28, 2002 11:39 AM