62 EN
Master Page: Left-Heading0
GR-DVP7-5EG_37-79.fm Page 62

DUBBING

.
* Connect when your TV/VCR has an S-VIDEO IN
connector.
** When connecting the cable, open the cover.
*** If your VCR has a SCART connector, use the
provided cable adapter.
1Following the illustrations, connect the
camcorder and the VCR. Also refer to pages24
and25.
2Set the camcorder’s VIDEO/MEMORY Switch to
“VIDEO”.
3Set the camcorder’s Power Switch to “P”
while pressing down the Lock Button located on
the switch.
4Turn on the VCR’s power.
5Insert the source cassette in the camcorder.
6Insert the recording cassette in the VCR.
7Engage the VCR’s AUX and Record-Pause modes.
●Refer to the instruction manual for the VCR.
8Press 4/9 on the camcorder to start playback of
the source tape.
9At the point you want to start dubbing, engage
the VCR’s Record mode.
10 To pause dubbing, engage the VCR’s Record-
Pause mode and press 4/9 on the camcorder.
11 Repeat steps8–10 for additional editing. Stop
the VCR and camcorder.
NOTES:
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌pg.11)
●As the camcorder starts to play your footage, it will
appear on your TV. This will confirm the
connections and the AUX channel for dubbing
purposes.
●Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do, they are being recorded onto the new
tape.
To choose whether or not the following displays
appear on the connected TV...
•Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(墌pg.38, 48) Or, press DISPLAY on the remote
control to turn on/off the date indication.
•Time code
Set “TIME CODE” to “OFF” or “ON”.
(墌pg.38, 48)
•Playback sound mode, tape speed and tape
running displays
Set “ON SCREEN” to “LCD” or “LCD/TV”.
(墌pg.38, 48)
Dubbing To A VCR
“Y/C”/“CVBS”
Video Out
Select Switch
To S/AV connector
S/AV/Editing cable
(provided)
To AUDIO, VIDEO and
S-IN* connectors
VCR
TV
Not connected
Cable Adapter***
(provided)
Connector
Cover**
GR-DVP7-5EG_37-79.fm Page 62 Thursday, February 28, 2002 3:59 PM