Basic operations (continued) | For the locations of the remote |
control buttons, refer to page 12. | |
|
|
|
|
Basic operations
Using the sleep timer
When the time you specify elapses, the main unit automatically turns off.
Press [SLEEP].
•Each time you press [SLEEP], the time indicated in the display window changes. You can set the time to 10, 20, 30, 60, 90, 120, 150 or 180 minutes.
Example: Display when the sleep timer is set to 60 minutes
Changing the remaining time
Press [SLEEP] repeatedly to select the time again.
Confirming the remaining time
Press [SLEEP] once.
Canceling the sleep timer
Press [SLEEP] repeatedly until “SLEEP
Turning off the main unit also cancels the sleep timer.
Changing the brightness of the display window
■When the main unit is turned on
Press [DIMMER] repeatedly.
•Each time you press [DIMMER], the brightness changes in 3 levels.
Locking disc ejection
You can lock the disc tray to prevent the disc from being ejected.
Setting the disc ejection lock
■When the main unit is turned off
Touch 0 while holding 7 on the main unit for more than 2 seconds.
If you attempt to open the disc tray by pressing 0 while the main unit is turned on, the disc tray does not open and “LOCKED” appears in the display window.
To cancel the lock, do the same operation above again while the main unit is turned off. “UNLOCKED” is displayed in the display window.
15