Convenient functions of disc/file playback (continued) | For the locations of the remote |
control buttons, refer to page 29. | |
|
|
|
|
Convenient functions of disc/file playback
Adjusting the picture quality (VFP)
■When a disc/file is played back or paused
■IMPORTANT
• Slide the remote control mode selector to [SHIFT].
1 Press [VFP].
•The current settings are displayed. Example: TV screen for the VFP mode Selected VFP mode
2 Press 2 or 3 (cursor) to select the video fine processor (VFP) mode.
•Each time you press 2 or 3 (cursor), VFP mode changes on the TV screen as follows.
-“NORMAL”
For normal playback. (You cannot adjust the image quality.) Go to step 7.
-“CINEMA”
Suitable for viewing a movie in a dim room. (You cannot adjust the image quality.)
Go to step 7.
-“USER1/USER2”
You can adjust the image quality. Go to step 3.
3 Press 5 or K (cursor) to select the item you want to adjust.
•Each time you press 5 or K (cursor), the item changes on the TV screen as follows.
-“GAMMA”
Controls the brightness of neutral tints while maintaining the brightness of dark and light portions.
(Setting range:
-“BRIGHTNESS”
Controls the brightness of the display. (Setting range:
-“CONTRAST”
Controls the contrast of the display. (Setting range:
-“SATURATION”
Controls the saturation of the display. (Setting range:
-“TINT”
Controls the tint of the display. (Setting range:
-“SHARPNESS”
Controls the sharpness of the display. (Setting range:
4 Press [ENTER].
Example: TV screen for “GAMMA”
5 Press 5 or K (cursor) to change the value.
6 Press [ENTER].
• To adjust other items, go back to step 3.
7 Press [VFP].
NOTE
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•If no operation is made for several seconds during the procedure, the settings made so far are automatically stored.
•When the [HDMI MONITOR OUT] terminal is connected, this function does not affect the picture quality.
33