1
2
3
Remote control mode selector
2/3 (cursor)/
ENTER
4
Selecting the video signal type
To view an image on the TV screen, select the video signal type correctly according to the TV after connecting the main unit to the TV.
■IMPORTANT
• Slide the remote control mode selector to [SHIFT].
Turn on the main unit.
•Refer to “Turning on/off the main unit” on page 12.
Press [DVD 3] or [USB 3].
•When a disc is loaded or a USB device is connected, press 7 to stop playback.
Press [SCAN MODE].
• The current video signal type appears.
Example: When “PAL.576I (Interlace)” is selected as the video signal
Press 2 or 3 (cursor) to select the video signal type suitable for the TV.
•When the TV is connected to the [VIDEO] terminal or the [COMPONENT] terminals, the video signal type can be selected as instructed below.
-Select “PAL. 576I” for a TV only compatible with a PAL interlaced video signal.
-Select “PAL. 576P” for a TV equipped with component terminals and compatible with a PAL progressive video signal.
-Select “NT. 480I” for a TV only compatible with an NTSC interlaced video signal.
-Select “NT. 480P” for a TV equipped with component terminals and compatible with an NTSC progressive video signal.
(Continued on the next page)
Preparation
10