Listening to FM radio
Number buttons*
Remote control mode selector
*For the number button usage, refer to “Using the number buttons” on page 12.
■IMPORTANT
• Slide the remote control mode selector to [AUDIO].
2 Press [TUNING ] or [TUNING ] repeatedly to select a radio station (frequency).
•When the main unit has received an FM radio, the “ST” (stereo) indicator lights up in the display window.
■Automatic tuning:
You can also select a radio station using automatic tuning.
Hold down [TUNING ] or [TUNING ] until the frequency starts changing, and then release the button.
•When the main unit has received a broadcast, the frequency automatically stops changing.
•You can select a specific radio station while searching for a broadcast. Press
[TUNING] or [TUNING] to stop automatic tuning when the desired frequency appears in the display window.
NOTE
•You can use 4 and x on the main unit instead of [TUNING ] and [TUNING ].
•If an FM radio is difficult to hear because of noise, you may be able to hear the broadcast more easily by pressing [FM MODE] to switch the sound to monaural reception. In this case, the “MONO” (monaural) indicator lights up in the display window. To return the sound to stereo reception, press [FM MODE] again. “AUTO” is displayed and the “ST” (stereo) indicator lights up in the display window.
Listening to FM radio
Selecting an FM radio station
1 Press [TUNER].
•Turning [SOURCE] on the main unit can also select an FM radio as the source. (Refer to page 12.)
Example: When an FM radio is received
Stereo indicator
Preset number | Frequency |
(Refer to page 17.) |
|
16