Connecting the speakers and subwoofer
Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on the rear of the main unit.
Red | Main unit (rear view) | White |
|
| |
Speaker cable |
| Speaker cable |
Preparation
Gray |
| Blue | |
Right speaker | Purple | Left speaker | |
(rear view) | (rear view) | ||
|
Subwoofer |
|
|
|
|
Speaker cable |
| |||
(rear view) |
| |||
|
|
|
|
|
|
|
| CAUTION |
|
■ IMPORTANT |
|
| ||
|
|
|
•Improper speaker cable connection reduces the stereo effect and sound quality.
•The supplied left/right speakers are magnetically shielded, but color irregularity may occur on the TV. To prevent color irregularity, set up the speakers following the instructions below.
(The subwoofer is not magnetically shielded.)
1.Turn off the main power of the TV before setting up the speakers.
2.Place the speakers enough distance from the TV so that they do not cause color irregularity on the TV.
3.Wait for approximately 30 minutes before turning on the main power of the TV again.
•The supplied speakers are manufactured exclusively for use with the
•Do not connect external speakers together with the supplied speakers. The change in impedance may damage the main unit and the speakers.
CAUTION
•The left and right speakers can be installed on a wall.
•When installing the speakers on a wall, be sure to have the speakers installed by qualified personnel.
•DO NOT install the speakers on the wall by yourself to avoid unexpected damage from them falling off the wall due to incorrect installation or weakness in wall structure.
•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to devices may result if the installed speakers interfere with daily activities.
6