Press [DBS].

Operating other equipment (continued)

Operating other equipment

Using the remote control for the DBS operation

Before the DBS operation, select the remote control mode for the DBS.

■IMPORTANT

• Slide the remote control mode selector to the lowest position.

1

2 Operate the remote control by pointing it at the DBS.

Remote control button Usage

[DBS/VCR F]

Turns on/off the DBS.

 

 

[CH +/–]

Changes channels.

Number buttons (1-9, 0, Selects the channels. 10)

NOTE

•When the remote control mode selector is slid to the lowest position and [DBS] is pressed, some buttons may not work.

•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].

Operating a VCR using the remote control

Setting the manufacturer code

■IMPORTANT

• Slide the remote control mode selector to the lowest position.

1 Press [VCR].

2 Hold down [DBS/VCR F].

•Hold down [DBS/VCR F] until you finish step 5.

3 Press [ENTER].

4 Press number buttons to enter the manufacturer code.

Examples:

For a Hitachi VCR: Press [0], then [4].

For a Mitsubishi VCR: Press [1], then [3]. When the manufacturer of your VCR has 2 or more codes, enter the manufacturer codes in turn and find the one that operates the VCR and the remote control properly.

Manufacturer

Code

JVC

01, 02, 03

Emerson

11, 26

Fisher

29

Funai

10, 14, 15, 16

Gold Star

12

Hitachi

04

Mitsubishi

13

NEC

25

Panasonic

07, 17

Philips

09

RCA

05, 06

Samsung

24

Sanyo

21, 22, 23

Sharp

27, 28

Shintom

30

Sony

18, 19, 20

Zenith

08

The initial code setting is “01 (JVC)”.

5 Release [DBS/VCR F].

NOTE

•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].

•Manufacturer codes are subject to change without notice. You may not be able to operate the VCR produced by the manufacturer.

•After replacing the batteries of the remote control, set the manufacturer code again.

55