Basic operations

Number buttons

Remote control mode selector

3 (playback)

■IMPORTANT

• Slide the remote control mode selector to [AUDIO].

Using the number buttons

Examples: 5: [5]

15: [10] → [1] → [5]

150: [10] → [10] → [1] → [5] → [0]

Turning on/off the main unit

Press [AUDIO F] (or [STANDBY F] on the main unit).

•The power of the main unit turns on and the [STANDBY] lamp (button) on the main unit turns off.

•Press [AUDIO F] (or [STANDBY F] on the main unit) again to turn off the power of the main unit. (The main unit enters the standby mode.)

•With the power off, pressing any of the following buttons also turns on the main unit.

-[DVD 3], [USB 3], [TUNER], [AUDIO IN] and [DIGITAL IN], 3 (playback) or 0 on the remote control

The function assigned to the pressed button starts working at the same time. (When 3 (playback) is pressed, “DVD” is selected as the source in the display window.)

•An internal cooling fan turns on when the main unit turns on. This is to prevent overheating of the main unit. The cooling fan produces noise during operation. This is not a malfunction.

Selecting the source

Press [DVD3], [USB3], [TUNER], [AUDIO IN] or [DIGITAL IN] on the remote control.

•You can also select the source by turning [SOURCE] on the main unit.

DVD USB FM

DGTL IN AUDIO IN

Adjusting the volume

Press [VOL +] or [VOL –] repeatedly.

•You can also adjust the volume by turning the [VOLUME] control on the main unit.

Basic operations

12