Recording from a CD to a USB device (continued)
Recording from a CD to a USB device
Adding (Editing) a title to a track/group on a USB device
1 Connect the USB device.
• Refer to page 20.
2 Press [USB 3].
3 Press 7 to stop playback.
TV screen
4 Press 5, K, 2 or 3 repeatedly to select the desired track/group.
5 Press [TITLE/DELETE] repeatedly to select “T. TITLE” or “G. TITLE” in the display window.
Display window
•Select “T. TITLE” to add a title to a track.
•Select “G. TITLE” to add a title to a group.
6 Press [ENTER].
•The title of the selected track/group appears in the display window.
•Press [CANCEL] to erase a stored title.
TV screen
7 Enter a title.
•Refer to “Entering a title” on page 52.
•To cancel editing a title, press 7.
8 Press [ENTER].
NOTE
•When “WAIT” is displayed in the display window, you cannot start editing.
•If “NO USB” appears in the display window, check the USB device or its connection.
•You can also refer to messages on the TV screen when you add or edit a title to a track/ group on the connected USB device. The messages indicate the operational status and provide instructions.
•Do not press [AUDIO F] while the main unit is editing a title. If [AUDIO F] is pressed, the main unit automatically turns off after the title is edited.
•If you press [ENTER] without first entering a title, “EDIT ERR” appears in the display window and the following display appears on the TV screen. At this time, press [ENTER] again to enter a title.
TV screen
CAUTION
•Do not bump or move the main unit while editing a title. Such movement may interfere with editing.
•Do not disconnect the USB device during editing, as this may cause malfunction.
51