Press [VCR].

Using the remote control for the VCR operation

Before the VCR operation, select the remote control mode for the VCR.

■IMPORTANT

• Slide the remote control mode selector to the lowest position.

1

2 Operate the remote control by pointing it at the VCR.

Remote control button

Usage

[DBS/VCR F]

Turns on/off the VCR.

 

 

[CH +/–]

Changes channels.

Number buttons

Selects the channels.

(1-10, 0, 10)

 

3 (playback)

Starts playback.

7

Stops playback.

 

 

8

Pauses playback.

 

 

y

Fast-forwards the tape.

 

 

1

Fast-rewinds the tape.

 

 

[REC] + 3 (playback)

Starts recording.

 

 

[REC] + 8

Pauses recording.

NOTE

•When the remote control mode selector is slid to the lowest position and [VCR] is pressed, some buttons may not work.

•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].

For the locations of the remote control buttons, refer to page 53.

Operating other equipment

56