JVC LYT1496-001A Video Playback, To play back files in the EXTMOV folder, Power Switch, Mode

24 EN VIDEO RECORDING & PLAYBACK

Video Playback	To play back files in the [EXTMOV] folder
	If the data cannot be recorded properly, the
	video files are saved to the [EXTMOV] folder.
	( pg. 22)
Power Switch	To play back the files in the [EXTMOV] folder,
	press the recording start/stop button or START/
Lock Button	STOP button on the remote control while the
	index screen is displayed in step 2, and then
MODE
	proceed to step 3 after [MPG] is displayed.
Zoom Lever
	To return to the index screen, press the
	recording start/stop button or START/STOP
	button on the remote control again.
	● The file information and playlist creation functions
49	are not available for files in the [EXTMOV] folder.
	● When deleting the files in the [EXTMOV] folder,
	perform it on the PC.

INFO/

Speaker

1 Set the power switch to . 2 Set the MODE switch to .

●The index screen for videos appears. The image on the index screen shows the first part of the shooting.

●If the power is turned off while video playback is paused, the camera memorizes the scene where the video was stopped. In this case, the stopped scene is displayed when the power is turned back on again.

●To switch the medium to be played back, see pages 21, 48 and 49.

3 Press / / / to select the video file you want to play back.

4 Press 49 to start playback.

5 To pause playback, press 49 again.

To return to the index screen

Slide the zoom lever to W when playback is paused.

To adjust the speaker volume

During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume.

To turn on/off the date display

To play back files edited on the PC

To use the camera to play back the video files (MPEG2 files, with the extension “.mpg”) which have been edited on the PC, follow the following procedure. First, change the file name to “MOV_xxxx.mpg” (xxxx should be a 4-digit number). Connect the camera to the PC with the USB cable, and open the [EXTMOV] folder. Copy the video files (“MOV_xxxx.mpg”) to the [EXTMOV] folder. (Refer to the software installation and USB connection guide.) Then follow the steps in “To play back files in the [EXTMOV] folder”.

NOTES:

●The playback picture can be viewed in the LCD monitor or on a connected TV. (
pg. 26)

●At the junctions between scenes, the image may stop momentarily or the sound may be interrupted. However, this is not a malfunction.

●The date and counter can be displayed during playback. (
pg. 49)

●When the camera heats up, the U indicator flashes. If the camera continues to heat up, playback may be stopped to protect the recording medium. In this case, turn off the camera power, and then wait until the camera cools down.

(
pg. 56)

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Set [DATE/TIME] to [ON], [AUTO] or [OFF]. (
pg. 48, 49)

To turn on/off the on-screen display Press INFO/ repeatedly.

To check the file information

Press INFO/ when playback is paused. (
pg. 38)