JVC LYT1496-001A, GZ-MG70AS, GZ-MG70AA Power, Charging the Battery Pack, Required charging time

14 EN GETTING STARTED

Power	1 Set the power switch to OFF.
	2 With the arrow on the battery pack pointing
This camera’s 2-way power supply system lets	downward, push the battery pack slightly against
you choose the most appropriate source of	the battery pack mount.
power. Do not use provided power supply units	● If the battery mount cover is attached, remove it
with other equipment.	by sliding BATT.
	3 Slide down the battery pack until it locks in
Charging the Battery Pack
	place.
Power/Charge Lamp	4 Connect the AC adapter to the camera.
	5 Connect the power cord to the AC adapter.
Power Switch	(forAP-V14A/ AP-V14E only)
	6 Plug the power cord into an AC outlet. The
	power/charge lamp on the camera blinks to
	indicate charging has started.
	7 When the power/charge lamp goes out,
Lock Button	charging is finished. Unplug the power cord from
	the AC outlet. Disconnect the AC adapter from
To DC connector	the camera.
	To detach the battery pack
	While sliding BATT., remove the battery pack.
Open the cover.	Required charging time
	Battery pack	Charging time
To AC outlet	BN-VF707U*	Approx. 1 hr. 30 min.
	BN-VF714U	Approx. 2 hr. 40 min.
AC Adapter	BN-VF733U	Approx. 5 hr. 40 min.
	* Provided
(ex. AP-V17E)

BATT.

Battery Pack

Arrow

Battery Pack Mount