JVC GZ-MG70AA, GZ-MG70AS Files, Copying/Moving Still Image, To copy or move by selecting files

							MANAGING FILES EN 41
	Copying/Moving Still Image			To copy or move by selecting files
				7 Press	/ to select [FILE], then press 49.
	Files
				● The index screen appears.
				8 Press	/	/	/ to select a desired file,
You can copy or move still image files between
				then press 49.
the built-in hard disk (HDD) and SD card using
				● The check mark (			) appears on the selected file.
the on-screen display.
				● To select other files, repeat this step.
Before proceeding to following steps,				● The scroll bar can also be used with the zoom
● Make sure that SD card is inserted in the SD				lever and	/	. ( pg. 30)
slot.				9 Press MENU to return to the previous screen.
● Make sure that enough free space is left in the				10 Press		/ to select [EXECUTE], then
copy/move destination medium.				press 49.
1 Set the power switch to or .
				11 File transfer starts.
2 Press MENU. The menu screen appears.				● To stop the file transfer, press 49, then select
3 Press		/	to select [REC MEDIA	[EXECUTE] and press 49.
				12 When [COPYING (MOVING)
SETTING], then press 49.
4 Press		/	to select [COPY/MOVE], then	COMPLETED] appears, press 49 to finish the
				operation.
press 49.

5 Press / to select [COPY] or [MOVE], then press 49.

COPY: Files are copied to the destination medium while leaving original files in the source medium.

MOVE: Files are moved to the destination medium while deleting original files (except read-only files) in the source medium.

6 Press / to select the direction of copy/ move, then press . (HDD ] SD or

SD ] HDD)

To copy or move all still image files in the recording medium

7 Press	/	to select [ALL].
8 Press	/	to select [EXECUTE], then
press 49.

●If you want to cancel, select [CANCEL], then press 49.

9 File transfer starts.

●To stop the file transfer, press 49, then select [EXECUTE] and press 49.

10 When [COPYING (MOVING) COMPLETED] appears, press 49 to finish the operation.

ADVANCED OPERATIONS