EN 43
TURN ON TV
1
Turn on the TV using the Power button on the TV or its
remote control.
SET TV BRAND CODE
2
1Press and hold TV.
2Press the NUMBER keys to enter your unit’s brand
code.
3Press OK, and release TV. Check if the TV's power
goes off as it should. If it does, try other operations
(Z step 2).
Once you have set the remote control to operate the
TV, you don't have to repeat this step until you
replace your remote control's batteries.
Some TV brands have more than one code. If the TV
does not function with one code, try entering another.
OPERATE TV
3
First, press TV to set the remote control to TV mode,
then press one of the following buttons: , TV/VCR,
TV␣PR+/–, (TV␣Muting), TV␣ +/– (TV volume),
and the NUMBER keys.
For some brands, you must press OK after having
pressed the NUMBER keys to enter a channel number.
IMPORTANT

Although the provided remote control unit is compatible with

JVC televisions, as well as many other models, it may not work

with your TV, or in some instances, may have limited function

capability.

TV Multi-brand Remote

Control

Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer's TVs can also be
controlled.
TV
NUMBER
OK
VCR
TV/VCR
TV +/–
TV PR+/–
CABLE/SAT/DVD

Control Your TV Using

Additional Buttons

Use the NUMBER keys, and the button, button or
button to select the TV's channel.
With televisions under Code 01, 02, 07, 08, 10, 11, 14,
20, 22, 23, 24, 25, 27, 33, 35, 38, 40 or 42, the
button corresponds to the 1-digit/2-digit entry switching
button (often labelled – /– –) of your TV's remote control.
With televisions under Code 01, 16, 28, 29, 34 or 39, the
button corresponds to the 10 + button, and the
button
corresponds to the 20 + button of your TV's remote control.
NOTE:

The way these buttons are used is determined by your TV.

Use these buttons as instructed for your TV's remote control.

ATTENTION
The remote control can operate not only the video recorder
but also some of your TV, cable box, satellite receiver and
DVD.
To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
To operate your TV, first press the TV button to set the
remote control to the TV mode.
To operate your satellite receiver, cable box or DVD, first
press the CABLE/SAT/DVD to set the remote control to
the satellite receiver, cable box or DVD mode.
TV BRAND NAME CODE
JVC 01, 23, 24, 25
AIWA 36
BEIJING 22
CCE 02
CHANGHONG 34
DAEWOO 17, 37
FERGUSON 27
FINLUX 30
FUNAI 32
GRADIENTE 15
GRUNDIG 19
HITACHI 10
ITT 28
JINXING 38
KONKA 40
LG/GOLDSTAR 18
MITSUBISHI 03
MIVER 29
NEC 20
NOBLEX 22
NOKIA 31
PANASONIC 04, 11
PEONY 34, 38, 39
PHILICO 10, 17, 21
PHILIPS 02, 42
SAMSUNG 12, 33, 34, 35
SANYO 13, 16
SHARP 06
SONY 07
TCL 41
THOMSON 26
TOSHIBA 08, 14