JVC HR-S5800AM Express Timer Programming, Access G-CODE Screen, Enter Programme Stop Time

30ENTIMERRECORDING(cont.)

Express Timer Programming

1

ACCESS G-CODE SCREEN

Press PROG.

ACCESS PROGRAMME SCREEN

Remember, the clock must be set before you can programme the timer (☞ pg. 12).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system (☞ pg. 52).

2

Press START +/–. (If you're just starting out, "P1" appears.)

– P1 –
START	STOP
–:– – =	–:– –
	SP
DATE	TV PROG
– –.– –	– –
[+/–] =	[1]: TITLE
[PROG] : EXIT

ENTER PROGRAMME START TIME

3

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30- minute increments, or press and release repeatedly to move 1 minute at a time.

START	– P1 –	STOP
	=
21:00		–:– –
		SP
DATE		TV PROG
– –.– –		– –
[+/–] =		[1]: TITLE
[PROG] : EXIT

TOP+/ –

START+/–

PROG

PR +/–

DATE+/ –

4

5

6

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

Press DATE +/–. (The current date appears on screen. The date you enter appears in its place.)

ENTER CHANNEL
POSITION
Press PR +/–.	– P1 –
START	STOP
21:00	= 22:00
	SP
DATE	TV PROG
25.12	1
[+/–] =	[1]: TITLE
[PROG] : EXIT