38 EN
Navigation Navigation Playback
This function is useful when you wish to quickly find out what
programmes you have recorded on a tape with this recorder.
This function allows you to select a programme to watch, and
then automatically searches for the start of the programme.

LOAD A RECORDED

CASSETTE

1
Insert a cassette recorded on this recorder.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS PROGRAMME

NAVIGATION SCREEN

3
Press PUSH JOG %fi to
place the pointer next to
“PROGRAMME NAVIGA-
TION”, then press OK or
PUSH JOG
#
.

SELECT A PROGRAMME

4
Press PUSH JOG %fi to
place the pointer next to
the programme you want
to watch.
START PLAYBACK
5
Press OK. “SEARCHING” appears on the TV screen.
Playback begins automatically after the selected
programme is located.

PROGRAMME NAVIGATION

When you record a TV programme with this recorder, the
recorder automatically stores in its memory the recording date,
start time and station name. You can store these information for
up to 8 programmes on one cassette. At maximum, information
for 10 tapes can be stored. You can also enter the programme
title when performing “G-CODE/SHOWVIEW Timer Programming”
(Z pg. 28) or “Express Timer Programming” (Z pg. 32). It is
possible to store these information only when “PROG. NAVI-
GATION” is set to “ON” (default setting).
NOTE:
If you press any button while “CHECKING TAPE DATA”
appears on the TV screen, the operation is canceled.
When inserting a cassette whose
record safety tab has been re-
moved ...
Playback begins automatically.
You can use Navigation Playback (Z right column), but you
cannot edit programme title or delete tape data (Z pg. 40,
41).
When inserting a cassette with
the record safety tab intact...
The recorder checks the tape
information for the Programme
Navigation.
If the recorder can store the
information for 3 or less tapes,
“REMAIN[ _]” also appears on
the TV screen.
If the recorder has already
stored the information for 10
tapes, “MEMORY FULL”
appears.
If you perform new recording,
the oldest tape information will
be deleted from the recorder’s
memory.
If the recorder cannot detect
the tape information, “NO
TAPE DATA DETECTED”
appears.
MAIN MENU
PROGRAMME NAVIGATION
FUNCTION SET
TUNER SET
INITIAL SET
[5/∞] =
[MENU] : EXIT
CHECKING TAPE DATA
REMAIN [ 3]
CHECKING TAPE DATA
MEMORY FULL
NO TAPE DATA DETECTED
14.06.00 22 : 00 PR.29
–
–.–
–.–
––
– : –
– PR. 7
27.02.99 22 : 00 F-1
25.12.00 WORLD CUP
[5/∞] = [1]: TITLE
[] : DELETE [MENU] : EXIT
Turn on the TV and select the VIDEO channel (or AV mode).