Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC 0701MNVIDPJ, HR-S5800AM, LPT0598-001A Recording

1 68

Download 68 pages, 1.4 Mb

EN 19

TV signals being received by the recorder's built-in tuner can be

recorded onto a video tape. You can "capture" a TV programme

using your video recorder.

S-VHS recording is possible only for PAL recordings made in the

SP, LP or EP mode, or NTSC recordings made in the SP mode.

S-VHS ET recording is possible only for PAL recordings made in

the SP mode, or NTSC recordings made in the SP mode.

RECORDING

Basic

Recording LOAD A CASSETTE

1

Insert a cassette with the record safety tab intact.

●The recorder power comes on automatically.

●The recorder checks the tape information for

Programme Navigation. For details, refer to “Naviga-

tion ” (Z pg. 38).

●Select the appropriate colour system (Z pg. 52).

CHOOSE A PROGRAMME

2

Press PR +/– or the NUMBER keys. Or push the JOG

dial and turn it to the left or right to select the channel

you wish to record.

SET TAPE SPEED

3

Press SP/LP/EP ( ). Check the SP/LP/EP indicator on

the recorder display panel to confirm the selected tape

speed.

START RECORDING

4

Press and hold RECORD and PLAY on the remote

control, or press RECORD on the recorder.

PAUSE/RESUME

RECORDING

5

Press PAUSE. Press PLAY to resume recording.

STOP RECORDING

6

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

cassette.

●To prevent accidental recording on a recorded cassette,

remove its safety tab. To record on it later, cover the hole

with adhesive tape.

Record safety tab

Accidental erasure prevention

Recording Resume

Function

If there is a power outage during recording (or Instant Timer

Recording or timer recording), the recording will resume

automatically when power is restored to the recorder unless

the recorder's memory backup has expired.

PAUSE

STOP

RECORD

B.E.S.T. takes place at the beginning of each first

SP and first LP (or EP) recording after inserting the

cassette (Z pg. 24).

PLAY

RECORD

NUMBER

Turn on the TV and select the VIDEO channel (or AV mode).

PLAY

STOP/EJECT

SP/LP/EP

NOTE:

When recording in NTSC, if EP is selected, recording willalways be done in the VHS mode even if an S-VHS cassette isused.

PR +/–

PAUSE

JOG

Contents

Main HR-S5800AM HR-S5880AM CONTENTS VIDEO CASSETTE RECORDER EN INSTRUCTIONS Safety Precautions CAUTION ATTENTION MOISTURE CONDENSATION Connections SITUATE RECORDER TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . S-VIDEO Connection You can obtain high-quality S-VHS pictures. pg. 46) For switching the TV's mode, refer to the instruction manual of your television. Video Channel Set INITIAL SETTINGS ACCESS VIDEO CHANNEL TEST SIGNAL To view picture signals from the video recorder, set your TV to the Video Channel. SET VIDEO CHANNEL 4 FINISH VIDEO CHANNEL With AV Connection or S-VIDEO Connection IMPORTANT: SET VIDEO CHANNEL FINISH VIDEO CHANNEL To view picture signals from the video recorder, set your TV to its AV mode. Installing/Removing the lithium battery 1 Auto Set Up Z SELECT LANGUAGE SET TIME SET DATE START AUTO CHANNEL On-Screen Displays ENABLE/DISABLE ON-SCREEN DISPLAY The superimposed indication on the TV screen tells you what the recorder is doing. q6 Select Language ACCESS LANGUAGE SELECT SCREEN SELECT LANGUAGE Clock Set ACCESS CLOCK SET SET TIME SET DATE SET YEAR Playback LOAD A CASSETTE FIND PROGRAMME START POINT STOP PLAYBACK Usable cassettes Playback Features High-Speed Search ACTIVATE HIGH-SPEED SEARCH Refer to the illustrations below as you read the following procedures. Still Picture/Frame-By-Frame ACTIVATE SLOW-MOTION PLAYBACK Manual tracking is possible during slow motion playback. ( pg. 16) Variable-Speed Search ACTIVATE VARIABLE-SPEED SEARCH OVERRIDE AUTOMATIC TRACKING ADJUST TRACKING MANUALLY When a new tape is inserted, the recorder enters the automatic tracking mode automatically. Repeat Playback ACTIVATE REPEAT PLAYBACK STOP PLAYBACK Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. Repeat Playback is not possible with a PAL tape recorded in EP mode. Video Stabilizer SKIP OVER UNWANTED SECTIONS Skip Search Soundtrack Selection During Playback Instant ReView Recording CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Accidental erasure prevention Recording Features Record One Programme While Watching Another SELECT CHANNEL TO WATCH Elapsed Recording Time Indication SET COUNTER DISPLAY ENGAGE ITR MODE SET RECORDING DURATION You can only perform ITR using the RECORD button on the recorder's front panel. Tape Remaining Time DISPLAY REMAINING TIME SELECT S-VHS MODE Super VHS ET S-VHS ET SELECT S-VHS ET MODE B.E.S.T. Picture System Preparation Recording TIMER RECORDING G- IEW V HOW /S ENTER RECEIVING CHANNEL POSITION NUMBER Guide Program Number G- IEW V HOW /S Regarding Guide Program Number Set Satellite Tuner Users Express Timer ACCESS G-CODE SCREEN ENTER PROGRAMME START TIME ENTER PROGRAMME STOP ENTER PROGRAMME DATE pg. 34). 24H Express Timer ACCESS 24HR EXPRESS TIMER PROGRAMME DISPLAY SET PROGRAMME START SET PROGRAMME STOP SET CHANNEL POSITION Check, Cancel And Replace Programmes DISENGAGE TIMER MODE CHECK SCREEN To cancel or replace a programme... CANCEL OR REPLACE A PROGRAMME P CONFIRM THE OVERLAPPING PROGRAMMES If you do not mind this overlap, press SELECT THE PROGRAMME TO MODIFY CANCEL OR CHANGE PROGRAMME SETTING Auto Timer The Auto SP . Auto SPLP Timer Automatic Sat- ellite Program Recording ENGAGE AUTO SATELLITE PROG REC MODE Navigation LOAD A RECORDED CASSETTE NAVIGATION SCREEN SELECT A PROGRAMME PROGRAMME NAVIGATION SELECT PROG. NAVIGATION MODE Programme Navigation Screen 1Recording date 2Recording start time* 3Station name* 4Currently selected programme 5Programme title* 1 4 SELECT PROGRAMME PROGRAMME NAVIGATION (cont.) Entering Character If you make a mistake, press DELETE TAPE DATA Remote A/B Code Switching SET REMOTE CONTROL CODE FOR REMOTE CONTROL CHECK REMOTE CONTROL CODE FOR RECORDER CHANGE CODE FOR RECORDER Remote Control Functions TURN ON TV SET TV BRAND CODE OPERATE TV TV Multi-brand Remote Control Control Your TV Using Additional Buttons TURN ON UNIT SET BRAND CODE OPERATE UNIT For satellite receiver and cable box . . . For DVD. . . Cable Box or Satellite Re- ceiver Multi-brand Code DVD Multi-brand Code Connecting/ Using A Stereo System SYSTEM CONNECTIONS When listening to sound through the connected stereo system, turn the TV's volume down completely. CAUTIONS: Preparation For Editing Advantages Of S-VHS Video Recorders Select EDIT when you are dubbing tapes. Refer to page 48, 49. EDITING Picture Control Edit From A Camcorder Z MAKE CONNECTIONS If the camcorder has no S-VIDEO output connector... If the camcorder has an S-VIDEO output connector... Edit To Or From Another Video Recorder SET RECORDING DECK'S INPUT MODE SELECT "EDIT" FOR PICTURE CONTROL SET MODE START SOURCE PLAYER START RECORDING DECK Audio Dubbing SET INPUT MODE LOCATE START POINT ENGAGE AUDIO DUBBING EDITING (cont.) START DUBBING END AUDIO DUBBING INFORMATION ON MULTI-SYSTEM COMPATIBILITY Off-Air Recording NTSC (M) PAL B/G, I, D/K SECAM B/G, D/K (OIRT) Tape-To-Tape Editing TUNER SET Auto Channel Set SELECT AUTO CH SET MODE Manual Channel Set SELECT POSITION SELECT BAND SET DESIRED STATION If you do not want to store the detected station... If you want to store the detected station... SELECT CHANNEL DELETE CHANNEL Swap Channel Positions SELECT POSITION (e.g. 03) SELECT POSITION (e.g. 09) SELECT CHANNEL TO FINE-TUNE PERFORM TUNING TV System Selection When you see the picture but the audio can't be heard or sounds unnatural SELECT CHANNEL TROUBLESHOOTING POWER TAPE TRANSPORT PLAYBACK RECORDING TIMER RECORDING TROUBLESHOOTING (cont.) OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING INDEX FRONT VIEW 123 $#@!09756 84 DISPLAY PANEL 12 3 7 Z REAR VIEW 9 SP INDEX (cont.) REMOTE CONTROL SPECIFICATIONS Page Page EN HR-S5800/S5880AM