JVC LPT0598-001A Edit To Or From Another Video Recorder, SET Recording Decks Input Mode

Edit To Or

From Another

Video

Recorder

TV Receiver Player Your recorder

VIDEO CHANNEL

RF Cable (provided)	AV Cable
	(not provided)
	Another recorder
Recorder

EN49

You can use your video recorder as the source player or the recording deck.

MAKE CONNECTIONS

1 Connect the player's AUDIO/VIDEO OUT connector to the recorder's AUDIO/VIDEO IN connector.

●Use the L connector for monaural connection.

SET RECORDING DECK'S

INPUT MODE

2 Set to AUX. With this video recorder, press NUMBER key "0" and/or PR +/– to select depending on the connector being used — "L-1" for the rear panel VIDEO/AUDIO input connectors, or "F-1" for the front panel VIDEO/AUDIO input connectors.

SELECT "EDIT" FOR PICTURE CONTROL SET MODE

3 Follow the "Picture Control" section on page 47, then select "EDIT."

START SOURCE PLAYER

4 Engage its Play mode.

START RECORDING DECK

5 Engage its Record mode.

Recorder Your recorder TV Receiver

AV Cable	VIDEO
	CHANNEL
(not provided)
	RF Cable
	(provided)
Another recorder
Player

NOTES:

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 10).

●All necessary cables can be obtained from your dealer.

●NTSC tapes being played back in the "NTSC [ PAL" mode (☞ pg. 52) cannot be dubbed to another recorder.

●When you dub an NTSC tape using your recorder as the playback deck, select "NTSC 3.58" (or "NTSC 4.43") for "NTSC" setting (☞ pg. 52).

●When you select "EDIT" to dub tapes, be sure to select "AUTO" (or "NORM" when the B.E.S.T. function is set to "OFF") after you finish dubbing the tapes (☞ pg. 47).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S VIDEO OUT and AUDIO IN/ OUT connectors.

When Using Your Video Recorder As The Source Player ...

... connect its rear panel S VIDEO OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors.

When Using Your Video Recorder As The Recording Deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "S-1".

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Select the appropriate colour system. (☞ pg. 52)

●For more information on multi-system compatibility, ☞ pg. 52.