EN 47
PreparationFor Editing
Turn on the TV and select the VIDEO channel (or AV mode).
Advantages Of S-VHS
Video Recorders
You can edit from VHS to S-VHS, from S-VHS to VHS, or,
from S-VHS to S-VHS.
●From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●From S-VHS to S-VHS: All signals will be transferred
without degradation.

EDITING

PUSH JOG
MENU
OK
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."

ACCESS MAIN NENU

SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Place the pointer next to "FUNCTION SET" by pressing
PUSH JOG %fi, then press OK or PUSH JOG
#
.

SELECT PICTURE CONTROL

SET MODE
3
Place the pointer next to
"PICTURE CONTROL" by
pressing PUSH JOG %fi,
then press OK or PUSH
JOG
#
to select the desired
mode.
AUTO*: Normally select
"AUTO."
It automatically adjusts the picture quality.
*When the B.E.S.T. function is set to "OFF" (Z
pg. 24), you can only select "NORM" instead
of "AUTO."
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTES:
●
When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
●
When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when the B.E.S.T.
function is set to "OFF") after you finish dubbing the
tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 48, 49.
FUNCTION SET
B. E. S. T. ON
PICTURE CONTROL AUTO
PAL/MESECAM AUTO
NTSC NTSC3. 58
AUTO TIMER OFF
O. S. D. ON
NEXT PAGE
[5/∞] =
[MENU] : EXIT