JVC JY-HD10 Size that is not compatible with this camcorder, Protected SD Memory Card loaded

		EN 75
Warning Indications
Indications	Meaning
MEMORY IS FULL	Appears when the memory card’s memory is full and shooting is not possible.
	● Appears if dubbing of copyguarded signals is attempted while this camcorder is
	being used as a recorder.
	● Appears in the following cases when dubbing still images from a tape to a
COPYING FAILED	memory card:
	– when no memory card is loaded.
	– when the memory card’s memory is full.
	– when the memory card is not formatted.
	– when a write-protected SD Memory Card is loaded.	( pg. 55)
MEMORY CARD!	Appears if there is no memory card loaded when you attempt to record on a
	memory card or access data on a memory card.
PLEASE FORMAT	Appears when there is a problem with a memory card and its memory is corrupt,
	or it has not been initialised. Initialise the memory card.	( pg. 32)
NO IMAGES STORED	Appears if there are no image files stored in the memory card when you attempt
	memory card playback.
	Appears when the camcorder does not recognise the loaded memory card.
CARD ERROR!	Remove the memory card once and insert it again. Repeat these procedures until
	no indication appears. If the indication still appears, the memory card is
	corrupted.
UNSUPPORTED FILE!	Appears when playing back a file that is not compatible with DCF or a file with a
	size that is not compatible with this camcorder.
CHECK CARD’S WRITE	● Appears when you attempt to shoot digital still images when the write
	protection tab on the SD Memory Card is set to the “LOCK” position.
PROTECTION SWITCH	● Appears when you attempt MEMORY SELECT menu operation with a write-
	protected SD Memory Card loaded.
E01, E02 or E06	The error indications (E01, E02 or E06) show what type of malfunction has
	occurred. When an error indication appears, the camcorder turns off
UNIT IN SAFEGUARD
MODE REMOVE AND	automatically. Remove the power supply (battery, etc.) and wait a few minutes for
	the indication to clear. When it does, you can resume using the camcorder. If the
REATTACH BATTERY
	indication remains, consult your nearest JVC dealer.
E03 or E04	The error indications (E03 or E04) show what type of malfunction has occurred.
	When an error indication appears, the camcorder turns off automatically. Eject		REFERENCES
UNIT IN SAFEGUARD
MODE EJECT AND	the cassette once and re-insert it, then check if the indication clears. When it
	does, you can resume using the camcorder. If the indication remains, consult
REINSERT TAPE
	your nearest JVC dealer.