JVC JY-HD10 manual Dubbing Still Images Recorded On, Card is not loaded, the message Copying

			EN 55
Dubbing Still Images Recorded On	1	Load a cassette. ( pg. 16)
	2	Load a memory card. ( pg. 17)
A Tape To A Memory Card	3	Set the Playback Mode Switch to “VIDEO”.
Still images can be dubbed from a tape to a memory	4	Set the Power Switch to “P” while pressing
		down the Lock Button located on the switch.
card.	5	Set “	COPY” to “ON”. ( pg. 33, 39)
Lock Button	6	Press 4·9 to start playback.
Power Switch	7	At the point you want to dub, press 4·9 again to
	8	engage Still Playback.
SNAPSHOT Button		To dub the image, press SNAPSHOT.
		● The “	” indication appears during
Playback Mode Switch		dubbing.
		● The selected image is stored in the memory
		card.
	NOTES:
	● If SNAPSHOT is pressed in step 8 when a memory
	card is not loaded, the message “COPYING
	FAILED” is displayed.
	● If an image recorded on the tape using “DV
MENU Wheel	WIDE” ( pg. 36) is dubbed to a memory card,
	the WIDE mode identifying signal is not dubbed
Play/Pause Button (4·9)	with it.

● To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). ( pg. 58)

● Images are dubbed in the following image sizes: Scenes recorded in HD mode: 1280 x 720 pixels Scenes recorded in SD mode: 848 x 480 pixels Scenes recorded in DV mode: 640 x 480 pixels

ADVANCED FEATURES