EN 39
Master Page: Right-Heading0

PLAYBACK MENUS

VIDEO

Playback sound

During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page33, select
“SOUND MODE” or “DV NARR.” from the Menu
Screen and set it to the desired parameter.
SOUND MODE (Factory-preset:STEREO )
STEREO :Sound is output on both “L” and “R”
channels in stereo.
SOUND L :Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
DV NARR. (Factory-preset:OFF)
OFF:Original sound is output on both “L” and
“R” channels in stereo.
ON:Dubbed sound is output on both “L” and “R”
channels in stereo.
MIX:Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
NOTES:
●The “SOUND MODE” setting is available for both
12-bit and 16-bit sound. (In previous models’
functions, “12-bit” is called “32 kHz” and “16-bit”
is called “48 kHz”.)
●The camcorder cannot detect the sound mode in
which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.

Synchro adjustment

For details, refer to “For More Accurate Editing”
(墌pg.64).
SYNCHRO (Factory-preset:±0.0)

Recording mode

Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (墌pg.52, 54)
REC MODE (Factory-preset:SP)
SP/LP
NOTE:
“REC MODE” can be set when the Power Switch is
set to “P” or “M”.

Dubbing from tape to memory card

COPY (Factory-preset:OFF)
OFF: When the SNAPSHOT button is pressed
during tape playback, the playback image pauses
and normal playback will resume after
approximately 6 seconds. (The still image is not
recorded.)
ON:Enables dubbing of images recorded on a
tape to a memory card. (墌pg.55)

Deleting thumbnail images

For details, refer to “To delete thumbnail images”
(墌pg.51).
NAVI.DEL.
IMAGE SEL./TAPE SEL. /ALL /RETURN

S-Video/AV input

S/AV INPUT (Factory-preset:OFF)
OFF:Enables audio/video signal output to a TV,
VCR, etc. via the S/AV connector. (墌pg.24, 52)
A/V IN:Enables audio and video signal input
from the S/AV connector. (墌pg.52)
S IN: Enables audio and S-video signal input from
the S/AV connector.
Video Menu
ADVANCED FEATURES
JY-HD10PAL.book Page 39 Wednesday, June 25, 2003 2:02 PM