JVC JY-HD10 manual 66 EN, This camcorder can be used as a WebCam via USB connection

66 EN SYSTEM CONNECTIONS (cont.)

Using The Camcorder As A

WebCam

This camcorder can be used as a WebCam via USB connection.

Connector Cover*

To USB

USB cable (provided)

To USB connector

1Make sure all necessary software (provided) are installed in your PC.

2Set the Recording Mode Switch to “MEMORY”.

3Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

4Connect the camcorder to your PC using the USB cable.

●“ ” appears on the screen.

●If the PC is not powered on, the camcorder does not enter the Web Camera mode.

5When finished, turn off the PC first, then the camcorder. Disconnect the USB cable from the camcorder and PC.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 11)

●You can also use the camcorder for video

conference over the Internet by using Microsoft Windows® Messenger®. For details, refer to the instruction manual of the provided software.

●In the Web Camera mode, the following buttons cannot be operated: SNAPSHOT, INDEX, NAVI, NAVI STORE, the Recording Start/Stop Button.

Refer to the instruction manuals of the PC and provided Software.

USB-equipped PC

*When connecting the cable, open the cover.