1-5
1.6 Emergency display function
This unit has a function for storing the history of the past two
emergencies (EMG) and displaying them on each FDP (or OSD).
With the status of the VCR and mechanism at the moment an
emergency occurred can also be confirmed.
Notes:
•

The EMG detail information <1><2>

show the information

on the latest EMG.

It becomes “ – – : – – : – –” when there is no latest EMG

record.

•

When using the Jig RCU, set its custom code to match

the custom code of the VCR.

Fig. 1-6a Jig RCU [PTU94023B]
Notes:
•

For the OSD display model, all EMG information are

showed by transmitting first code from the Jig RCU.

•

For the EMG content, see “1.6.3 EMG content descrip-

tion”.

(2) Transmit the code “59” from the Jig RCU again.
The FDP shows the EMG detail information <1> in the form
of “ *1 : *2 : 34 ”.
*1 : Deck operation mode at the moment of EMG
*2 : Mechanism operation mode at the moment of EMG
3–: Mechanism sensor information at the moment of
EMG
–4 : Mechanism mode position at the moment of EMG
Note:
•

For the EMG detail information <1> , see “1.6.4 EMG de-

tail information <1> ”.

(3) Transmit the code “59” from the Jig RCU once again.
The FDP shows the EMG detail information <2> in the form
of “ *5 : *6 : *7 ”.
*5 : Type of the cassette tape in use <1> .
*6 : Winding position of the cassette tape in use
*7 : Type of the cassette tape in use <2> (Winding area)
Note:
•

For the EMG detail information <2>

, see “1.6.5 EMG de-

tail information <2>”.

(4) Transmit the code “59” from the Jig RCU once again to re-
set the display.
1.6.2 Clearing the EMG history
(1) Display the EMG history.
(2) Transmit the code “36” from the Jig RCU.
(3) Reset the EMG display.
Example 1 E : 01 : 03
Previous EMG
Latest EMG
No EMG record
Example 2 E : –– : ––
1.6.1 Displaying the EMG information
(1) Transmit the code “59” from the Jig RCU.
The FDP shows the EMG content in the form of “E:**:**”.
INITIAL MODE
DATA CODE
CUSTOM CODE
43: A CODE
53: B CODE
[Data transmitting method]
Depress the “ ” ( 3 ) button
after the data code is set.
Jig RCU
FDP display model
[FDP display]
0: 00 : 00
E:**:**
*1: *2 :34
*5:*6 :*7
E:**:**
*1: *2 :34
*5: *6 :*7
EMG detail information <2>
EMG detail information <2>
EMG detail information <1>
EMG detail information <1>
EMG content display
(E:Latest:Previous)
Normal display
OSD display model
[OSD display]
EMG EMG content display
(E:Latest:Previous)