JVC manual Sound, English, Menu item, Selectable setting/item, Only for KW-AVX838/KW-AVX830

Models: KW-AVX838

1 93
Download 93 pages 24.14 Kb
Page 35
Image 35
 Sound

*7 Only for KW-AVX838/KW-AVX830.Manual background Sound

Menu item

Selectable setting/item

Initial: Underlined

Fader/Balance

 

 

Fader : Adjust the front and rear speaker output balance.

Fader/Balance

Reset

F6 to R6; Initial 0

 

 

 

 

 

Fader

0

• When using a two-speaker system, set the fader to the center (0).

 

Balance 0

 

 

 

 

 

 

Balance : Adjust the left and right speaker output balance.

Back

 

Exit

L6 to R6; Initial 0

 

 

 

 

 

 

 

Press [5//2/3] or drag [

] to adjust.

 

 

 

• To clear the adjustment, press [Reset].

Volume Adjust *6

Adjust and store the auto-adjustment volume level for each source, comparing

 

to the FM volume level. The volume level will automatically increase or decrease

 

when you change the source.

<Fix> appears if an FM broadcast is selected as the source. –12to +12; Initial 00

Subwoofer Level

Adjust the subwoofer output level.

 

00 to 08; Initial 08

 

 

 

High Pass Filter

Through

: Select when the subwoofer is not connected.

 

On

: Select when the subwoofer is connected.

 

 

Low Pass Filter

Select the crossover frequency between the front/rear speakers and the subwoofer.

 

55Hz, 85Hz, 120Hz

 

 

Amplifier Gain

You can change the maximum volume level of this unit.

 

Off

: Deactivates the built-in amplifier.

 

Low

: VOL 00 to 30 (Select this if the maximum power of the

 

 

speakers is less than 50 W.)

 

High

: VOL 00 to 50

If you change the setting from <High> to <Low> while the volume level is set higher than “VOL 30,”the unit automatically changes the volume level to “VOL 30.”

Loudness

You can activate/deactivate the loudness function.

 

 

Off

: Cancels.

 

 

On

: Boost low and high frequencies to produce a well-balanced

 

 

sound at a low volume level.

 

 

 

 

Rear Speaker *7

You can activate/deactivate the rear speakers.

 

 

• This setting takes effect only when Dual Zone is activated. (

28)

 

Off

: Deactivate the rear speakers.

 

 

On

: Activate the rear speakers.

 

*6 For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG Audio and the others.

*7 Only for KW-AVX838/KW-AVX830.

ENGLISH

35

Page 35
Image 35
JVC manual Sound, English, Menu item, Selectable setting/item, Only for KW-AVX838/KW-AVX830