JVC KW-AVX838 For Sirius Radio For XM Radio, Check your Sirius ID, ~ Select SAT as the source

ENGLISH

Listening to the satellite radio (Only for KW-AVX830/KW-ADV793)

Before operating, connect either one of the following (not supplied) to the expansion port on the rear of the unit.

To listen to the SIRIUS Satellite radio	SC-C1 and KS-SRA100
	PnP, SC-VDOC1 and KS-SRA100
To listen to the XM Satellite radio	JVC Smart Digital Adapter–XMDJVC100
	CNP2000UC and CNPJVC1

Activating subscription

	KW-AVX830 KW-ADV793
For SIRIUS Radio	For XM Radio

~Select “SAT” as the source. ( 10)

The SIRIUS Satellite radio starts updating all the SIRIUS channels. (See “GCI update”below.)

•Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.

ŸCheck your SIRIUS ID.

AV Setup

Setup

Demonstration	Off			On
Wall Paper			Ambient
Area Setting	US		Europe	SA
Sirius ID		112233445566

!Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474).

“Subscription updated Press any key to continue” appears on the screen once subscription has been completed.

~Select “SAT” as the source. ( 10)

XM Tuner* starts updating all the XM channels. “Channel 1”is tuned in automatically. (See “GCI update”below.)

ŸCheck your XM Satellite radio ID

labelled on the casing of the XM Tuner, or tune in to “Channel 0.”

The 8-digit (alphanumeric) ID number is displayed on the screen.

To cancel the ID number display, select any

channel other than “0.”

!Contact XM Satellite radio on

the internet at <http://xmradio. com/activation/> to activate your subscription, or you can call 1-800-XM- RADIO (1-800-967-2346).

Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).

*XM Tuner: XMDirect TM Tuner Box or XMDirect2 Tuner System

GCI (Global Control Information) update

•If channels are updated after subscription, updating starts automatically, and no sound can be heard:

–For SIRIUS Satellite radio: “Updating”appears.

–For XM Satellite radio: “UPDATING” (when XMDJVC100 is connected) or “UNAUTH” (when CNP2000UC and CNPJVC1 are connected) appears.

•Update takes a few minutes to complete.

•Do not press any buttons or perform any operations until updating is completed.

22