JVC KW-AVX830 manual Sound equalization, Using a rear view camera, Displaying the rear view screen

Sound equalization

~

Equalizer

ŸSelect a sound mode.

Equalizer

Flat

Natural

Dynamic

Vocal Boost

	Bass Boost		60 100 1.0k 2.5k 10k 15k
	Super Bass
Back		Edit	Exit

Move to other six sound modes

•You can also change the sound mode by pressing the short cut icon. ( 7)

Storing your own adjustments

You can store your adjustments into <User1>, <User2>, and <User3>.

1Repeat steps ~ and Ÿ, then...

Back Edit Exit

2Select the band (1), frequency (2), adjust the volume (3), then adjust the quality factor to make the sound natural (4).

FrequencyBand

User Store Low Mid High

User1
User2
User3
Freq	60 Hz	100	1.0k	2.5k	10k	15k
Q	60
	1.0
Back						Exit

Quality factor*3Select <User1>, <User2>, or <User3> to store the adjustment.

The adjustment is stored.

•When <High Pass Filter> is set to <On>, the setting of low band is invalid. Select <Through> to activate the low band setting. ( 35)

*When adjusting “High” band, the quality factor value is fixed.

ENGLISH

Using a rear view camera

•To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view camera, see the Installation/Connection Manual.

Displaying the rear view screen

The rear view screen is displayed when you shift the gear to the reverse (R) position.

•While the pictures through the camera are shown on the screen, no message will be displayed.

•When you perform one of the following operations, the rear view screen is cleared.

–Press DISP.

–Shifting the gear to another position other than the reverse (R) position.

29