JVC KW-AVX830 Changing HD Radio reception mode, Audio automatically, Tuning to analog audio only

Changing HD Radio reception mode

While receiving an HD Radio broadcast, the unit tunes to digital or analog audio automatically due to the receiving condition.

1

Mode

2

Mode

Mono	Off		On
DX/Local
	Local		DX
SSM
		Start
Blend Hold
	Analog	Digital	Auto

Analog	Tuning to analog audio only.
Digital	Tuning to digital audio only.
Auto	Switch between digital and analog
	audio automatically.

•If no sound can be heard from the selected setting, change the setting to <Analog> or <Digital>.

•The setting automatically changes to <Auto> if you tuned in to or change to another station, or if you turned off the power.

•This setting cannot take effect for the conventional FM/AM stations.

•If the radio station forces the reception mode to digital, the DIGITAL indicator flashes.

•To improve FM reception, see “When an FM stereo broadcast is hard to receive...,” 11.

•To preset stations automatically, see “Automatic

presetting — SSM (Storing-station Sequential Memory) (for FM only),” 12.

Tuning in to stations with sufficient signal strength

This function works only for FM bands. Once you have activated this function (selected <Local>), it always works when searching for FM stations.

1

Mode

2
	Mode
		Mono	Off		On
		DX/Local	Local		DX
		SSM		Start
		Blend Hold	Analog	Digital	Auto

Only stations with sufficient signal strength will be detected.

•The DX indicator goes off, then the LO indicator lights up.

ENGLISH

25