JVC KW-AVX830, KW-AVX838 manual Do not start the car engine if a USB device is connected

Playing a USB device

•This unit can play JPEG/MPEG1/MPEG2*/MP3/WMA/WAV files stored in USB mass storage class device.

•All tracks in the USB device will be played repeatedly until you change the source.

•Make sure all important data has been backed up to avoid losing the data.

*Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.

• You cannot connect a computer or portable HDD to the USB cable from the rear of the unit.

ENGLISH

USB cable from the rear of the unit

The source changes to “USB”and playback starts.

Cautions:

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “Now Reading”is shown on the screen.

•Do not start the car engine if a USB device is connected.

•Stop playback before disconnecting a USB device.

•Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.

•This unit may not be able to play the files depending on the type of USB device.

•Operation and power supply may not work as intended for some USB devices.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

•Some USB devices may not work immediately after you turn on the power.

•For more details about USB operations, 59.

15