JVC KW-AVX830 Bluetooth operations for KW-ADV793, English, Menu item, Selectable setting/item

Menu item		Selectable setting/item		Initial: Underlined
	Ring Mode	In Unit	: Selects the ring tone set on the unit.
		In Phone	: Selects the ring tone set on the mobile phone. (This
			function may not work depending on the mobile
			phone.)
	Ring Tone Change	When <Ring Mode> is set to <In Unit>, you can select the ring tone for
		received calls and Text message from Tone1, Tone2, Tone3.
s		Call Tone	: Selects the ring tone for phone calls.
		Message Tone	: Selects the ring tone for Text message.
Setting
	Initialize	Hold [Enter] to initialize all settings you have made in <Bluetooth>
		menu.
	Information	The following information is shown:
		Name	: The unit name
		Address	: The Mac address of the unit
		Version	: The Bluetooth software
		Phone Device/	: The connected device names
		Audio Device

ENGLISH

Bluetooth operations for KW-ADV793

For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200: separately purchased) to the expansion port on the rear.

•Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.

•Refer to pages iii and iv at the end of manual to check the countries where may use the Bluetooth® function.

To use a Bluetooth device through the unit (“BT Phone” and “BT Audio”) for the first time, you need to establish Bluetooth wireless connection between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset your unit. Up to 5 devices can be registered in total.

•Only one device can be connected at a time for each source (“BT Phone” and “BT Audio”).

KW-ADV793

Connecting Bluetooth devices Connecting a new Bluetooth device

Registration (Pairing) methods

Use either of the following items in <Bluetooth> menu to register and establish the connection with a device.

•Select “BT Phone” or “BT Audio” as the source to operate <Bluetooth> menu. ( 10)

Open	Make the unit ready to establish a new
	Bluetooth connection. The connection
	is established by operating the
	Bluetooth device.
Search	Make the unit ready to establish a new
	Bluetooth connection. The connection
	is established by operating this unit.

Continued on the next page

45